Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Bravo
    4. : How to replace the radiator on a Fiat Bravo

Fiat Bravo - Video tutorial

Model: Fiat Bravo - Years 1995-2001
Part: Radiator
Operation: How to replace the radiator on a Fiat Bravo

How to replace the radiator of a Fiat Bravo? We open the bonnet, with a suitable socket wrench we go to disassemble the plates that block the radiator in the upper part, then we lift the car on a column bridge and loosen the clamp of the water hose. We detach the various convoy sleeves of the refrigeration system with pliers, (we unscrew the lock that blocks the front hood if it hinders the extraction). Once free from screws and pipes, we can extract the fan kit and immediately afterwards the radiator from the engine compartment. Let's get ready to mount the new piece in the engine compartment with all the pieces.


Posted on 23 November 2023 by ScegliAuto

    Frequently Asked Questions

    • Bravo 2007-2014 - How much does it cost to replace the Fiat Bravo radiator? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos