Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Gear Knob on a Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Shift knob

Need to replace the damaged gear knob on a Panda? Here’s how to change the gear knob and the protective gaiter. Take the knob in your hands and rotate it left and right until it comes off the gear stick: pull firmly to remove it from the stick. Use a plastic lever to disconnect the frame of the leather gaiter (if it needs replacing). Fit the new leather gaiter with the clips (if removed), then take the new knob and push it onto the stick in the centre console until it locks in place. Finally, test the movement of the stick in the centre console to ensure the knob is securely anchored.

Updated on 30 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Removing the Gear Knob on Fiat Panda
Removing the Gear Knob on Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) How to remove the gear knob on the second series Fiat Panda? Let's see how to remove the knob and the trim gaiter. Detach the frame where the leather…
How to replace the gear knob and gear lever gaiter of the Fiat Panda
How to replace the gear knob and gear lever gaiter of the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) We will briefly see the step-by-step instructions on how to disassemble and replace the knob and the gear lever boot of the Fiat Panda. First, we get…
How to replace the gear knob and gaiter of the Fiat Panda
How to replace the gear knob and gaiter of the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) The instructions in this guide will show us the disassembly and replacement process of the gear knob and gear lever gaiter of the Fiat Panda. First o…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos