Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Clutch from a Fiat Punto

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Clutch

Today, you will learn how to remove the clutch from a Fiat Punto 188. First, lift the vehicle and open the bonnet: then remove and disconnect the battery, moving the ECU out of the way; next, remove the clutch pump, which is held by two 13 mm bolts. At this point, unscrew the two 18 mm bolts that secure the gearbox; then remove the front wheels and separate the track rod ends for easier access, and also remove the driveshaft. Unscrew the oil drain plug and let the oil drain out; access the gearbox and remove the bolts from the clutch cover: follow the video until the end!

Updated on 31 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Clutch of the Fiat Grande Punto?
How to Replace the Clutch of the Fiat Grande Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To replace the clutch of the Fiat Grande Punto, it is advisable to lift the car using a ramp to access the lower components of the engine bay. By loo…
How to Remove the Gearbox and Clutch of the Fiat Grande Punto 1.2
How to Remove the Gearbox and Clutch of the Fiat Grande Punto 1.2
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In today's video tutorial, you will see the main steps to remove the gearbox and clutch of the Fiat Grande Punto 1.2, as well as the Punto Evo. First…
Removing the Clutch on Fiat Grande Punto 1.2
Removing the Clutch on Fiat Grande Punto 1.2
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In today's video tutorial, follow the step-by-step instructions to remove and replace the clutch on a Fiat Grande Punto 1.2 Petrol. First, lift the v…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos