Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Instrument Cluster in a Ducato

Model: Fiat Ducato X250 - Years 2006-2014
Part: Instrument cluster

Want to remove the instrument cluster? Here’s how to take apart the instrument panel of a Ducato. Unscrew the securing screws located at the sides of the instrument cluster. Now, pull the entire piece away from the dashboard, disconnect the various power connectors located at the back. Remove the piece from the dashboard housing. Dismantle the instrument cluster to replace the bulbs or replace the entire instrument block. Connect the operating electrical connector and screw in the securing screws of the instrument cluster. Switch on the ignition and check its operation.

Updated on 31 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Dashboard Bulbs in the Fiat Ducato
Replacing Dashboard Bulbs in the Fiat Ducato
Fiat Ducato (2002-2006 / ) In this video, you will disassemble the instrument cluster of a Fiat Ducato to replace a blown bulb. Start by unscrewing the two screws on the transp…
How to Remove and Repair the Instrument Cluster of the Fiat Ducato
How to Remove and Repair the Instrument Cluster of the Fiat Ducato
Fiat Ducato (2014-2026 / X290) This guide briefly outlines the steps to remove and repair the instrument cluster of the Fiat Ducato. First, get in the vehicle and start removing th…
Guide to Replacing the Dashboard Bulbs on the Fiat Ducato
Guide to Replacing the Dashboard Bulbs on the Fiat Ducato
Fiat Ducato (2006-2014 / X250) Follow this guide to remove and replace the dashboard lights on the Fiat Ducato, following the instructions below. First, get inside the vehicle and …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos