Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Repair the Instrument Cluster of the Fiat Ducato

Model: Fiat Ducato X290 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Instrument cluster

See other generations:
Video tutorial

This guide briefly outlines the steps to remove and repair the instrument cluster of the Fiat Ducato. First, get in the vehicle and start removing the plastic cover located at the top; then unscrew all the fixing screws found on the sides of the instrument cluster using a Torx screwdriver, as shown in the video.

Now remove the cluster from the dashboard and disconnect the electrical connectors at the back; then carry out the repair of the instrument cluster and reassemble everything, applying the reverse procedure!


Updated on 12 July 2026 by ScegliAuto


Related tutorials

How to repair the instrument panel of the Fiat Ducato dashboard
How to repair the instrument panel of the Fiat Ducato dashboard
Fiat Ducato (2014-2026 / X290) In this guide we will see the instructions that will allow us to repair the instrument panel of the Fiat Ducato dashboard, but also of the Peugeot Bo…
How to Repair the Sliding Door of a Fiat Ducato?
How to Repair the Sliding Door of a Fiat Ducato?
Fiat Ducato (2006-2014 / X250) To repair the sliding door of the Fiat Ducato, first remove the inner door panel: this should simply be pried off using a screwdriver. Once the panel…
How to Deactivate and Repair the Immobiliser Contact on the Fiat Ducato JTD
How to Deactivate and Repair the Immobiliser Contact on the Fiat Ducato JTD
Fiat Ducato (1981-1994 / ) In today's video tutorial, you will learn how to deactivate and repair the immobiliser contact on the Fiat Ducato, following the instructions below. …

How to Set the Clock on a Renault Master 3

This guide shows you how to set a new time on a Renault Master 3. Start by turning on the instrument cluster of the vehicle without starting the engine. Next, using the end of the right-hand steering column stalk, scroll through the options on the display until you reach 'set time', then press the down arrow button to make the displayed time blink. Once this is done, press and hold the down arrow button to change the hour, which you can adjust using the two arrow buttons at the end of the stalk. Once the correct hour is set, press and hold the down arrow button again to move to the minutes. After setting the correct time, restart the vehicle.

Watch the video!


by ScegliAuto

More videos