Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Air Conditioning Resistor from a Fiat Ducato

Model: Fiat Ducato X250 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Heater core

See other generations:
Video tutorial

Start by entering the cabin and sitting in the passenger seat. The resistor is located beneath the glove compartment.

Proceed to disconnect the connector attached to the resistor by simply unclipping it. Next, unscrew and remove the bolt that secures the resistor in place. Once the bolt is removed, the resistor will only be held by a clip.

To release it, push it upwards. This way, you will have freed the resistor, which you can then remove.

Once you have extracted the resistor, you will have successfully completed the removal.


Updated on 1 April 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Fan Resistor on a Fiat Ducato Camper
How to Replace the Cabin Fan Resistor on a Fiat Ducato Camper
Fiat Ducato (2006-2014 / X250) This guide will show you how to disassemble and replace the cabin fan resistor on a Fiat Ducato in simple steps. First, get inside the vehicle and st…
How do you replace the cabin fan resistor of the Fiat Ducato?
How do you replace the cabin fan resistor of the Fiat Ducato?
Fiat Ducato (1993-2016 / MK 2) In order to replace the cabin fan resistor of the Fiat Ducato, you will need to loosen the screws and remove the rivets that secure the lower dashboa…
Cabin Fan Repair on Fiat Cars
Cabin Fan Repair on Fiat Cars
Fiat Ducato (2014-2026 / X290) On the Fiat Ducato and, more generally, on other Fiat cars, the resistor is located under the dashboard on the passenger side, as shown in the video.…

Other guides you may be interested in

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos