Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the cabin fan resistor of the Fiat Ducato?

Model: Fiat Ducato MK 2 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Blower motor

See other generations:
Video tutorial

In order to replace the cabin fan resistor of the Fiat Ducato, you will need to loosen the screws and remove the rivets that secure the lower dashboard panel on the passenger side: the fan will be located in this position and the corresponding resistor will be in its lower part.

You will need to disconnect the resistor from the appropriate connector and then insert the new one: the new resistor must now be fixed to its housing and finally everything can be covered with the corresponding panel.

Then you can check that everything is functioning correctly.


Posted on 27 September 2025 by ScegliAuto


Related tutorials

How to Replace the Cabin Fan Resistor on a Fiat Ducato Camper
How to Replace the Cabin Fan Resistor on a Fiat Ducato Camper
Fiat Ducato (2006-2014 / X250) This guide will show you how to disassemble and replace the cabin fan resistor on a Fiat Ducato in simple steps. First, get inside the vehicle and st…
How to Remove the Air Conditioning Resistor from a Fiat Ducato
How to Remove the Air Conditioning Resistor from a Fiat Ducato
Fiat Ducato (2006-2014 / X250) Start by entering the cabin and sitting in the passenger seat. The resistor is located beneath the glove compartment. Proceed to disconnect the conne…
Cabin Fan Repair on Fiat Cars
Cabin Fan Repair on Fiat Cars
Fiat Ducato (2014-2026 / X290) On the Fiat Ducato and, more generally, on other Fiat cars, the resistor is located under the dashboard on the passenger side, as shown in the video.…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos