Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Dual Zone Climate Control on a Fiat Bravo

Model: Fiat Bravo Bravo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Warning light – error code

See other generations:
This video is currently unavailable

If your Fiat Bravo has dual zone electronic climate control and it does not respond correctly to commands, meaning it does not respect the temperature differences set by the driver and passenger, it may be due to an inability to properly control the opening and closing flaps of the air ducts; the first operation is to perform a reset of the device: this is a manual operation that is done by turning on the ignition, setting the fan speed to zero, then pressing the buttons in the centre of the two knobs simultaneously and holding them until a countdown appears that must reset on both sides.


Updated on 1 April 2026 by ScegliAuto


Related tutorials

How to Fix the Dual Zone Air Conditioning on Fiat Bravo
How to Fix the Dual Zone Air Conditioning on Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) To access the broken actuators (there are five in total) on the Fiat Bravo 2nd series, you first need to remove the entire centre dashboard, which ob…
How to Replace the Dashboard on a Fiat Bravo
How to Replace the Dashboard on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Remove the panel located directly beneath the stereo to access the screws needed to free the climate control panel. Next, you can also remove the sma…
How to Remove the Climate Control Switches on a Fiat Bravo 2
How to Remove the Climate Control Switches on a Fiat Bravo 2
Fiat Bravo (2007-2014 / Bravo 2) In today’s tutorial, we will see the main steps to remove the climate control switches on a Fiat Bravo second series. First, get inside the vehicle a…

    Frequently Asked Questions

    • Bravo 2007-2014 - How to reset the dual zone climate of the Fiat Bravo? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos