Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Bravo
    4. : How to fix the dual zone air conditioning on Fiat Bravo

Fiat Bravo - Video tutorial

Model: Fiat Bravo Bravo 2 - Years 2007-2014
Part: Air conditioning
Operation: How to fix the dual zone air conditioning on Fiat Bravo

To get to the broken actuators (there are five in total) on the Fiat Bravo 2nd series you will first have to remove the entire central dashboard, which, of course, is a time-consuming process. Start by extracting the gearshift gaiter, then remove all the plastic around the gearshift lever itself, as shown in the video. Switch to the rear of the lever, then remove the lower and side, which give the footrests of the front seats. You will even have to take out the steering wheel airbag and the plastic under it. Continue to follow the disassembly shown in the video until you get to the climate actuators.


Posted on 15 February 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Bravo 2007-2014 - Why does air at a different temperature come out of the air vents of the Fiat Bravo? Read Answer
    • Bravo 2007-2014 - What to do if the heating system does not work in the Fiat Bravo? Read Answer
    • Bravo 2007-2014 - What problems with the air conditioning on the Fiat Bravo? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos