Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Bravo
    4. : How do you remove the steering wheel from the Fiat Bravo?

Fiat Bravo - Video tutorial

Model: Fiat Bravo Bravo 1 - Years 1995-2002
Part: Steering wheel
Operation: How do you remove the steering wheel from the Fiat Bravo?

In order to replace the steering wheel of the Fiat Bravo, you need to loosen the screws located in the rear part of the steering wheel, so that the airbag can be released from inside its housing in the center of the steering wheel. When it has been released, it will be necessary to disconnect the connectors on the back so that it can be completely removed. Now you can unscrew the central nut that secures the steering wheel to the steering column: when the nut has also been unscrewed, you can completely remove the steering wheel and replace it with a new one. After replacement, the airbag can be reinstalled.


Posted on 26 May 2023 by ScegliAuto



Disassembly of the Fiat Bravo steering wheel
Fiat Bravo (2007-2014 / Bravo 2) In this video we will see how to remove the steering wheel of a Fiat Bravo. First of all, let's get inside the car and remove the screws that we find
How to remove the airbag from the Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) The removal of the airbag on a Fiat Bravo vehicle is a fairly simple operation to perform independently, also thanks to our short video tutorial. The
The fuse box of the Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) In this video we can see how simple it is to replace a fuse on the Fiat Bravo. First we must know that in the Fiat Bravo there are two fuse boxes; ea

    Frequently Asked Questions

    • Bravo 2007-2014 - What problem with the steering of the Fiat Bravo? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos