Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Exhaust of a Fiat Panda?

Model: Fiat Panda 141, MK 1 - Years 1980-2003
Part: Exhaust muffler

To carry out this removal, ensure that the exhaust of your Fiat Panda is cold. Therefore, do not perform this operation immediately after using the car. Start by disconnecting the tailpipe, being careful not to damage the rubber support. Next, detach the other rubber supports that reduce vibration. Once all the supports are disconnected, unscrew the bolts securing the central support of the exhaust. This will free the exhaust, allowing you to remove it, completing the disassembly.

Updated on 2 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Exhaust of a Fiat Panda
How to Remove the Exhaust of a Fiat Panda
Fiat Panda (1980-2003 / 141, MK 1) To perform this removal, the exhaust of your Fiat Panda must be cold. Therefore, do not carry out this operation immediately after using the car. Sta…
How to Replace the Exhaust of a Fiat Panda
How to Replace the Exhaust of a Fiat Panda
Fiat Panda (1980-2003 / 141, MK 1) Before starting this replacement, ensure that the exhaust of your Fiat Panda is not hot. Begin by disconnecting the tailpipe, taking care not to dama…
How to Remove the Exhaust Pipe from a Fiat Panda
How to Remove the Exhaust Pipe from a Fiat Panda
Fiat Panda (1980-2003 / 141, MK 1) How to remove the damaged exhaust pipe (muffler) from a Fiat Panda? Follow this guide to proceed with the removal of the muffler. Lift the car using …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos