Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Panda
    4. : How to remove the muffler of a Fiat Panda

Fiat Panda - Video tutorial

Model: Fiat Panda 141, MK 1 - Years 1980-2003
Part: Muffler
Operation: How to remove the muffler of a Fiat Panda

To carry out this disassembly, the muffler of our Fiat Panda must be cold. Therefore this operation is not to be performed immediately after using the machine. So let's start by disengaging the terminal, without however damaging the internal rubber. After that we will have to go and unhook the other rubber pads that act as anti-vibration supports. Once we have released all the rubber pads, we will have to unscrew the bolts that secure the central support of the muffler. At this point, we will have freed the muffler, and we can go and remove it. By doing so, we will have finished the disassembly.


Posted on 2 January 2024 by ScegliAuto

    Frequently Asked Questions

    • Panda 2003-2012 - How much does the Fiat Punto 1200 petrol muffler cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos