Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Panda
    4. : How to remove the muffler of a Fiat Panda

Fiat Panda - Video tutorial

Model: Fiat Panda 141, MK 1 - Years 1980-2003
Part: Muffler
Operation: How to remove the muffler of a Fiat Panda

How to remove the damaged exhaust pipe (muffler) on a Fiat Panda? Let's see in this video guide how to disassemble the muffler. We lift the car with a column bridge (jack), unscrew the pins that block the exhaust pipe with a socket wrench; we detach the metal clamp that connects the two pieces (as in the video). Let's get ready to assemble the new piece: screw the exhaust pipe with the clamp and all the pins. We return the car to the ground, enter the car body and reset the service warning light (if present in the car) with a computer. Once all the verification procedures have been completed, we disconnect the tester from the connector.


Posted on 18 November 2023 by ScegliAuto

    Frequently Asked Questions

    • Panda 2003-2012 - How much does the Fiat Punto 1200 petrol muffler cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos