Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Exhaust Pipe on a Fiat Panda

Model: Fiat Panda 141, MK 1 - Years 1980-2003
Part: Exhaust muffler

How to remove the exhaust pipe (muffler) on an old model Fiat Panda? Lift the car with a column lift (jack), use a socket spanner to unscrew the securing bolts of the exhaust pipe, and detach the metal clamp connecting the two pieces (as shown in the video). Prepare to fit the new piece: reattach the exhaust pipe with the clamp and all the bolts. Lower the car to the ground, enter the vehicle, and reset the service light with a diagnostic tool (if illuminated). Once all checks are completed, disconnect the tester from the connector.

Updated on 7 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Exhaust Pipe from a Fiat Panda
How to Remove the Exhaust Pipe from a Fiat Panda
Fiat Panda (1980-2003 / 141, MK 1) How to remove the damaged exhaust pipe (muffler) from a Fiat Panda? Follow this guide to proceed with the removal of the muffler. Lift the car using …
How to Remove the Exhaust of a Fiat Panda
How to Remove the Exhaust of a Fiat Panda
Fiat Panda (1980-2003 / 141, MK 1) To perform this removal, the exhaust of your Fiat Panda must be cold. Therefore, do not carry out this operation immediately after using the car. Sta…
How to Remove the Exhaust of a Fiat Panda?
How to Remove the Exhaust of a Fiat Panda?
Fiat Panda (1980-2003 / 141, MK 1) To carry out this removal, ensure that the exhaust of your Fiat Panda is cold. Therefore, do not perform this operation immediately after using the c…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos