Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Auxiliary Belt on a Fiat 500

Model: Fiat 500 Epoca - Years 1957-1975
Part: V-belt

Before starting, open the rear engine cover of your Fiat 500. Begin by unscrewing and removing the three 10mm bolts that secure the dynamo sprocket cover. Once these three bolts are removed, you can take off the cover by sliding it off the dynamo. At this point, remove the worn auxiliary belt. To fit the new auxiliary belt and close the dynamo sprocket, simply repeat these few steps in reverse, and you will have successfully completed the replacement.

Updated on 2 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

When to Change the Auxiliary Belt on a Fiat 500 L?
When to Change the Auxiliary Belt on a Fiat 500 L?
Fiat 500 (2012-2021 / ) The manufacturer of the Fiat 500 L recommends replacing the auxiliary belt at least once every 6 years or every 75,000 miles. This video will show yo…
How do you replace the timing belt of the Fiat 500 1.2?
How do you replace the timing belt of the Fiat 500 1.2?
Fiat 500 (2007-2024 / 312) In this video we see how to replace the timing belt and not only, here we also show the work concerning the auxiliary belt, for those interested. Alt…
How to Replace the Timing Belt on a Fiat 500?
How to Replace the Timing Belt on a Fiat 500?
Fiat 500 (2007-2024 / 312) Today, tackle the replacement of the timing belt on your Fiat 500. First, open the bonnet and remove the air filter assembly along with the engine co…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos