Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How to replace the auxiliary belt of the Fiat 500

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2022
Part: V-belt
Operation: How to replace the auxiliary belt of the Fiat 500

Today we see in this short guide, the step-by-step instructions to be able to disassemble and replace the auxiliary serpentine belt of the Fiat 500. First of all, lift the car and start unscrewing the screws of the lower engine protection, in order to remove it; after which we use a socket or Phillips wrench to loosen the belt tensioner, thus removing the auxiliary belt, as shown in the video. At this point we are going to install the new auxiliary belt in the correct direction, tightening and loosening the belt tensioner, following the video tutorial until the end for reassembly!


Posted on 1 July 2022 by ScegliAuto

    Frequently Asked Questions

    • 500 2007-2023 - How do you change the auxiliary belt of a Fiat 500? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos