Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on a Fiat 500?

Model: Fiat 500 312 - Years 2007-2024
Part: Timing belt

Today, tackle the replacement of the timing belt on your Fiat 500. First, open the bonnet and remove the air filter assembly along with the engine cover. Next, take off the valve cover that also covers the timing belt and the lower timing belt cover. Loosen the tensioner and lift the belt upwards to remove it. To fit the new timing belt, follow the same steps in reverse order. With this, you will have successfully completed the replacement on your Fiat 500.

Updated on 19 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the timing belt of the Fiat 500 1.2
Replacement of the timing belt of the Fiat 500 1.2
Fiat 500 (2007-2024 / 312) Today we will see the guidelines for replacing the timing belt of the Fiat 500 1.2. First, we open the hood and start disassembling and removing the …
How and when to change the timing belt of the Fiat 500 1.2?
How and when to change the timing belt of the Fiat 500 1.2?
Fiat 500 (2007-2021 / 312) This guide provides instructions on how and when to change the timing belt of the Fiat 500 with a 1.2 engine. The timing belt for this type of engine…
How to Replace the Timing Belt on a Fiat 500 Abarth?
How to Replace the Timing Belt on a Fiat 500 Abarth?
Fiat 500 (2007-2021 / 312) To replace the timing belt on a Fiat 500 Abarth, open the bonnet to access the engine compartment. You will need to remove the upper engine cover, th…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2007-2021 - When to replace the Abarth 500 timing belt? Read answer
    • 500 2007-2024 - How often should the Abarth 500's timing belt be replaced? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos