Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How and when to replace the timing belt on the Fiat 500 1.2

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Timing belt

See other generations:
Video tutorial

The information provided in this guide will allow you to remove and replace the timing belt on the Fiat 500 1.2; the timing belt should be replaced every 5 to 6 years or 75,000 miles, but it is advisable to perform a visual check before these deadlines.

First, open the bonnet of the vehicle and begin by removing the engine mount, then remove the cylinder head cover; lift the vehicle and remove the right front wheel, then remove the V-belt and the crankshaft pulley.

At this point, perform the procedure to replace the toothed belt, following the video to the end!


Posted on 23 May 2026 by ScegliAuto


Related tutorials

How and when to change the timing belt of the Fiat 500 1.2?
How and when to change the timing belt of the Fiat 500 1.2?
Fiat 500 (2007-2021 / 312) This guide provides instructions on how and when to change the timing belt of the Fiat 500 with a 1.2 engine. The timing belt for this type of engine…
How to Replace the Timing Belt on a Fiat 500?
How to Replace the Timing Belt on a Fiat 500?
Fiat 500 (2007-2024 / 312) Today, tackle the replacement of the timing belt on your Fiat 500. First, open the bonnet and remove the air filter assembly along with the engine co…
Replacement of the timing belt of the Fiat 500 1.2
Replacement of the timing belt of the Fiat 500 1.2
Fiat 500 (2007-2024 / 312) Today we will see the guidelines for replacing the timing belt of the Fiat 500 1.2. First, we open the hood and start disassembling and removing the …

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2007-2024 - How often should the Abarth 500's timing belt be replaced? Read answer

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos