Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Clutch on a Fiat 500 1.2

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Clutch

See other generations:
Video tutorial

Today, you will learn the main steps to remove and replace the clutch assembly on a Fiat 500. First, lift the vehicle and remove the front wheels; then, unscrew the oil drain plug and allow the oil to flow into a container. Next, separate the driveshaft from the braking system by removing the retaining pin, and detach the driveshaft.

Remove any additional components that obstruct access to the clutch housing, and once you reach that point, unscrew the nuts and extract the clutch, replacing it: follow the video to the end!


Updated on 2 April 2026 by ScegliAuto


Related tutorials

How to Replace the Clutch Pedal on the Fiat 500
How to Replace the Clutch Pedal on the Fiat 500
Fiat 500 (2007-2024 / 312) In this brief guide, you will discover the instructions to disassemble and replace the clutch pedal on the Fiat 500. First, get in the vehicle and re…
How to Replace the Clutch Switch on a Fiat 500
How to Replace the Clutch Switch on a Fiat 500
Fiat 500 (2007-2024 / 312) In this short video tutorial, you will see the main instructions for removing and replacing the clutch pedal switch on a Fiat 500. First, get into th…
How to Replace the Clutch Pedal Switch on a Fiat 500?
How to Replace the Clutch Pedal Switch on a Fiat 500?
Fiat 500 (2007-2021 / 312) To replace the clutch switch on a Fiat 500, access the rear of the clutch pedal. This switch lifts upwards when the clutch pedal is pressed, allowing…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos