Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch Pedal on the Fiat 500

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018

See other generations:
Video tutorial

In this brief guide, you will discover the instructions to disassemble and replace the clutch pedal on the Fiat 500. First, get in the vehicle and remove the plastic cover above the pedal assembly. Then, unscrew the bolts of the clutch pedal, disconnecting the cable to remove it, as shown in the video.

At this point, carry out the repair or replacement of the pedal by installing the new one and adjusting it. Check the clutch operation, adjusting the cable from the engine bay if necessary.


Posted on 29 June 2026 by ScegliAuto


Related tutorials

How to Replace the Clutch Pedal Switch on a Fiat 500?
How to Replace the Clutch Pedal Switch on a Fiat 500?
Fiat 500 (2007-2021 / 312) To replace the clutch switch on a Fiat 500, access the rear of the clutch pedal. This switch lifts upwards when the clutch pedal is pressed, allowing…
How to Replace the Clutch Switch on a Fiat 500
How to Replace the Clutch Switch on a Fiat 500
Fiat 500 (2007-2024 / 312) In this short video tutorial, you will see the main instructions for removing and replacing the clutch pedal switch on a Fiat 500. First, get into th…
Replacing the Clutch on a Fiat 500 1.2
Replacing the Clutch on a Fiat 500 1.2
Fiat 500 (2007-2021 / 312) Today, you will learn the main steps to remove and replace the clutch assembly on a Fiat 500. First, lift the vehicle and remove the front wheels; th…

    Frequently Asked Questions

    • 500 2007-2022 - Where is the USB port fuse located on a Fiat 500? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos