Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Panda
    4. : How to replace the spark plugs on a Fiat Panda

Fiat Panda - Video tutorial

Model: Fiat Panda 141, MK 1 - Years 1980-2003
Part: Spark plugs
Operation: How to replace the spark plugs on a Fiat Panda

Before we can start, we will have to go and open the front hood of our Fiat Panda. Let's start by removing the upper engine cover and the relative air filter box, unscrewing the upper fixing screw. By doing so, we will have reached the plugs of the spark plugs, which we will have to go to disconnect and remove. Once we have completed this step, we will have reached the candles. To remove them, all we have to do is unscrew them with the appropriate key, and we will have finished the disassembly. At this point, to fit the new spark plugs and close the engine, we will simply have to repeat these few steps in reverse, and we will have successfully completed the replacement.


Posted on 5 January 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Panda 2012-2021 - How to replace the spark plugs in the Fiat Panda? Read Answer
    • Panda 2003-2012 - How often are the spark plugs on the Fiat Panda natural power changed? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos