Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : Disassembly of the Fiat 500L steering wheel

Fiat 500 - Video tutorial

Model: Fiat 500 500 L - Years 2012-2023
Part: Steering wheel
Operation: Disassembly of the Fiat 500L steering wheel

Today we will see the instructions on how to remove the steering wheel of a Fiat 500L in simple steps, but also on other models of the manufacturer. First of all we get on board the car and we go to unscrew with a screwdriver the fixing screws of the plastic cap located under the steering wheel, as shown in the video; once removed, remove the flywheel airbag by disconnecting the electrical connector. At this point we just have to remove the steering wheel, unscrewing the central bolt with a socket wrench; for reassembly it will be sufficient to apply the reverse disassembly procedure!


Posted on 5 January 2024 by ScegliAuto

    Frequently Asked Questions

    • 500 2012-2023 - How do you unlock the steering wheel of the Fiat 500? Read Answer
    • 500 2007-2022 - What problems with the power steering on the Fiat 500? Read Answer
    • 500 2007-2022 - What problems could the power steering of the Fiat 500 1.2 present? Read Answer
    • 500 2014-2022 - What to do when the steering of the Fiat 500 is locked? Read Answer
    • 500 2007-2022 - How to adjust the position of the steering wheel on the Fiat 500? Read Answer
    • 500 2014-2022 - What to do if the horn of the Fiat 500 X does not work? Read Answer
    • 500 2014-2022 - What is the price of the Fiat 500 steering wheel? Read Answer
    • 500 2012-2023 - Why does the steering wheel of the Fiat 500L tend to get stuck? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos