Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal of Car Radio for Replacement

Model: Fiat 500 312 - Years 2007-2024
Part: Car stereo

To avoid marking the dashboard, use a sturdy plastic tool to remove the cover of the upper compartment, disconnect the wires, and remove the two screws of the ventilation unit, gently moving it sideways. Unscrew the two screws of the radio cover panel and, using the plastic tool, remove the entire front panel. Unscrew the four screws of the radio support and remove it by disconnecting the various connectors. Retrieve the plastic frame and reposition it with the four screws. Place the new radio in the new compartment, ensuring all cables are correctly positioned without pinching them. Then reassemble the front panel, ensuring it fits perfectly.

Updated on 6 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Generate the Radio Code for the Fiat 500
How to Generate the Radio Code for the Fiat 500
Fiat 500 (2007-2021 / ) Discover in this guide how to generate the radio code for the Fiat 500, as well as for other models from the manufacturer. First, remove the radio an…
Reset Fiat 500 Radio
Reset Fiat 500 Radio
Fiat 500 (2007-2021 / 312) The process to unlock the radio on a Fiat 500/500L is necessary whenever the battery is disconnected. In this situation, the display shows "CODE" whe…
How to replace the timing belt of the Fiat 500
How to replace the timing belt of the Fiat 500
Fiat 500 (2007-2024 / 312) Today's guide will show us the procedure for disassembling and replacing the timing belt and water pump of the Fiat 500. First, we open the hood of t…

    Frequently Asked Questions

    • 500 2007-2022 - Why does the radio volume control on the Fiat 500 not work? Read answer
    • 500 2007-2022 - What to do if the radio of the Fiat 500 does not work? Read answer
    • 500 2012-2023 - How to unlock Fiat 500 car stereo? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos