Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Wheel on Fiat 500 (and Fitting Spare Wheel)

Model: Fiat 500 312 - Years 2007-2021
Part: Wheel

Loosen the bolts securing the wheel, raise the car with a jack (if you don't have a ramp), and unscrew them until you can remove them completely. Voila! At this point, you can already extract the wheel from its seat. If you have a spare wheel, follow the procedure to use it: open the boot, lift the cover, and unscrew the upper pin securing the spare wheel, remove the cover, and proceed with fitting. To do this, place the wheel in position and screw in the bolts. Only once they are all tightened, secure them properly.

Updated on 3 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Spare Wheel on a Fiat 500L
How to Replace the Spare Wheel on a Fiat 500L
Fiat 500 (2012-2023 / 500 L) In this brief video, you will see the instructions for removing and replacing the punctured wheel with the spare wheel on a Fiat 500L. First, open th…
How to Replace the Wheel with the Spare on a Fiat 500
How to Replace the Wheel with the Spare on a Fiat 500
Fiat 500 (2007-2024 / 312) Today's instructions will show you how to remove and replace the wheel with the spare on a Fiat 500, in simple and quick steps. First, take the spare…
Replacing a Wheel on a Fiat 500X
Replacing a Wheel on a Fiat 500X
Fiat 500 (2014-2022 / 500 X) In this video tutorial, you will see instructions on how to remove and replace a wheel, for example in case of a puncture, on a Fiat 500X. First, tak…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos