Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Diesel Filter on a Fiat Tipo

Model: Fiat Tipo 356, 357, 358 - Years 2016-2026
Part: Diesel fuel filter

Before starting, open the front bonnet of your Fiat Tipo. Begin by unfastening the clips that secure the hoses connected to the diesel filter. Once done, unclip the clips that hold the two hoses connected to the filter, then disconnect them. At this point, unclip and disconnect the electrical connector as well. Once this step is completed, unscrew and remove the Allen screws that secure the upper cover of the filter, then remove it to access the filter that needs replacing. Proceed to extract it, and you will have completed the disassembly. To fit the new filter and close everything up, simply repeat these steps in reverse order, and the replacement will be complete.

Updated on 4 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Diesel Filter on a Fiat Tipo
Replacing the Diesel Filter on a Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) Lift the bonnet and insert the support rod. Locate the diesel filter, which is near the windscreen (if unsure, refer to the video where it is clearly…
Replacing the Diesel Filter on a Fiat Tipo (2015) 1.6 MJT
Replacing the Diesel Filter on a Fiat Tipo (2015) 1.6 MJT
Fiat Tipo (2016-2026 / 356, 357, 358) Replacing the diesel filter on a Fiat Tipo 1.6 MJT is a DIY maintenance task that can be easily performed. You will need a new filter and a 20 Torx k…
Replacing the Air Filter on the Fiat Tipo
Replacing the Air Filter on the Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) Follow these simple and quick steps to remove and replace the engine air filter on the Fiat Tipo. First, open the bonnet and start by loosening the c…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos