Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Wishbone on a Fiat Punto

Model: Fiat Punto MK 1, 176 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999
Part: Control arm

See other generations:
Video tutorial

This guide covers the removal of the wishbone on a Fiat Punto. Lift the car using a suitable jack, then remove the front wheel.

Use a socket wrench to unscrew the lower securing bolt of the wishbone and the bolt mounted under the wheel hub, then unscrew the bolts on the upper part of the arm as shown in the video. Remove the wishbone from the bolt seats using a pry bar. Fit the new part: insert the wishbone into the two ends of the guides and start tightening all the bolts on the threads shown in the video (attach the wishbone to the wheel hub and the other end to the chassis).

Refit the wheel after assembly.


Updated on 4 April 2026 by ScegliAuto


Related tutorials

How to Replace the Wishbone on a Fiat Punto
How to Replace the Wishbone on a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) If you hear a noise coming from the front wheel during acceleration, especially when braking, like a thumping sound, it is likely that the bushes of …
Replacing the Rear Lights on Fiat Grande Punto - Punto Evo
Replacing the Rear Lights on Fiat Grande Punto - Punto Evo
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In today's video, you will learn how to remove and replace the rear lights on a Fiat Grande Punto and Punto Evo by following these simple steps. Firs…
Throttle Body Replacement on Fiat Grande Punto
Throttle Body Replacement on Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Replace the throttle body on a Fiat Grande Punto. Open the front bonnet and secure it. Remove the plastic engine cover (unscrew the securing screws);…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos