Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Throttle Body Replacement on Fiat Grande Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Throttle body

Replace the throttle body on a Fiat Grande Punto. Open the front bonnet and secure it. Remove the plastic engine cover (unscrew the securing screws); take it off the cylinder head. Disconnect the fuel line from the throttle body, unscrew the screws around it (using a screwdriver). Install the new part in the engine bay. Screw in the securing screws, reconnect the fuel pipe and the throttle cable. Refit the black plastic panel over the cylinder head. Use the vehicle and test it. Reset any service warning lights.

Updated on 15 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove and Clean the Throttle Body on Fiat Grande Punto 1.4 Petrol
Fiat Punto (1999-2011 / MK 2, 188) In this video tutorial, you will learn how to remove and clean the throttle body on a Fiat Grande Punto 1.4 Petrol. First, open the bonnet of your ca…
How to Dismantle and Clean the Throttle Body of the Fiat Punto Evo 1.2
How to Dismantle and Clean the Throttle Body of the Fiat Punto Evo 1.2
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video, we will see the main steps to dismantle and replace the throttle body of the Fiat Punto Evo 1.2, as well as the Grande Punto. First, o…
How to clean the throttle body of a Fiat Punto
How to clean the throttle body of a Fiat Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video we can see how to clean the throttle body of a Fiat Punto 188: we will need a specific cleaner, which we can find for example on Amazon…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos