Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Cabin Filter Replacement on Fiat Panda

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Cabin air filter

See other generations:
Video tutorial

Unscrew the screws holding the mat on the front passenger side. Then, remove the panel present in that area which protects the central tunnel (it is simply clipped in). Unscrew the screws that secure the long narrow cover of the air filter compartment and extract it simply by pulling.

Clean the compartment with a compressed air gun and insert the new filter you purchased, placing it in the correct orientation indicated by the arrow drawn. Re-screw the cover of the compartment, reattach the panel, and re-screw the front mat. Nothing easier!


Updated on 4 April 2026 by ScegliAuto


Related tutorials

How to Replace the Pollen Filter on the Fiat Panda
How to Replace the Pollen Filter on the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Today, we will see the necessary guide to remove and replace the pollen filter cartridge on the Fiat Panda, following the instructions below. First, …
How to Perform a Full Service on a Fiat Panda
How to Perform a Full Service on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) If you want to perform a full service on your Fiat Panda without going to a garage, and thus save money, you can use this video as a guideline for th…
Replacing Air Filter on Fiat Panda 169
Replacing Air Filter on Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) Open the bonnet and insert the support rod. Access the pollen filter compartment by unhooking the side latch. This will allow you to remove half of t…

Where to Find and How to Remove the Spare Wheel of a Peugeot 5008?

The spare wheel of a Peugeot 5008 is located under the rear of the vehicle. To remove it, you need to lift the third row of seats to access the fixing bolt that holds the spare wheel in position. Using the correct spanner, proceed to unscrew the fixing bolt until the wheel is no longer secured. At this point, you can extract the spare wheel from underneath the vehicle. Once you have completed this step, you are free to fit the spare wheel. Ensure you correctly remount the spare wheel and securely tighten the fixing bolt when you are finished.

Watch the video!


by ScegliAuto

More videos