Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Air Filter on Fiat Panda 169

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Cabin air filter

See other generations:
Video tutorial

Open the bonnet and insert the support rod. Access the pollen filter compartment by unhooking the side latch. This will allow you to remove half of the compartment and create enough space to extract the air filter.

Simply pull the filter out by hand. While you're at it, clean the inside of the compartment with a clean cloth and an air compressor.

Fit the new air filter you purchased, ensuring it is inserted the correct way, close the compartment, and secure it with the side latch. Close the bonnet and check for any unusual noises with the engine running.


Updated on 2 April 2026 by ScegliAuto


Related tutorials

Removal and Replacement of the Air Filter
Removal and Replacement of the Air Filter
Fiat Panda (2003-2012 / 169, MK 2) The video shows the removal of the air filter in a few simple steps. …
Removing the Engine Air Filter on a Fiat Panda
Removing the Engine Air Filter on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Do you want to replace the air filter on a Fiat Panda? Let's see how to remove the air filter from inside the engine bay. Open and lift the front bon…
How to Replace Spark Plugs on Fiat Panda 169 1.2 Petrol
How to Replace Spark Plugs on Fiat Panda 169 1.2 Petrol
Fiat Panda (2003-2012 / 169, MK 2) In today's tutorial, you will learn how to remove and replace the engine spark plugs on a Fiat Panda 169 1.2 Petrol in simple steps. First, open the …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos