Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Engine Air Filter on a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Air filter

Do you want to replace the air filter on a Fiat Panda? Let's see how to remove the air filter from inside the engine bay. Open and lift the front bonnet, then locate the air filter housing. Start by unscrewing the securing screws on top of the air housing. Remove the cover from the housing once the securing screws are removed. Take out the old air filter from inside the housing and fit a new one (same size and type). Close the air filter housing and screw in the securing screws. Finally, close the front bonnet after reassembling the parts.

Updated on 3 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Air Filter on a Fiat Panda
How to Remove the Air Filter on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before starting, open the bonnet of your Fiat Panda to gain access to the engine bay. Begin by unfastening the securing clips of the air filter cover…
How to Remove the Air Filter on a Fiat Panda
How to Remove the Air Filter on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before you can start, open the bonnet of your Fiat Panda to access the engine bay. Begin by unfastening the clips that secure the air filter cover. T…
Removal and Replacement of the Air Filter
Removal and Replacement of the Air Filter
Fiat Panda (2003-2012 / 169, MK 2) The video shows the removal of the air filter in a few simple steps. …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos