Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Cabin Pollen Filter on Fiat Ducato

Model: Fiat Ducato X250 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Cabin air filter

See other generations:
Video tutorial

To replace the cabin pollen air filter on a Fiat Ducato, first, position your vehicle on a level surface or on a ramp so that it is securely immobilised, allowing the operator to work safely. Now, locate the position of the filter, which is situated behind the central glove box. Unscrew the three screws at the top that are visible when the door is opened to remove it. Once done, move the cross member into position (as shown in the images) to remove it, allowing you to shift the glove box. Below, you will find the cover under which the filter is located.

Unscrew the two screws that secure it, and once removed, you can extract the filter and replace it with a new one. Reassemble everything following the reverse of the operations seen.


Updated on 5 April 2026 by ScegliAuto


Related tutorials

Replacing the Cabin Filter on a Fiat Ducato
Replacing the Cabin Filter on a Fiat Ducato
Fiat Ducato (2014-2026 / X290) Replacing the air filter, also known as the pollen filter, on a Fiat Ducato vehicle is not as easy and straightforward as it is for some car models. …
Where is the pollen filter located on the Fiat Ducato?
Where is the pollen filter located on the Fiat Ducato?
Fiat Ducato (2006-2014 / X250) In this video, we can see where the pollen filter is located in the Fiat Ducato X250. Even though what we are looking at is a camper, the mechanical …
How to Replace the Cabin Air Filter on a Fiat Ducato
How to Replace the Cabin Air Filter on a Fiat Ducato
Fiat Ducato (2014-2026 / X290) This guide shows how to replace the cabin air filter on the Fiat Ducato 2.3 MultiJet. The first step is to open the glove compartment and unscrew all…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos