|
Do it yourself
| |||
| ||||
Where is the pollen filter located on the Fiat Ducato?
Model: Fiat Ducato
X250
- Years:
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Video tutorial
In this video, we can see where the pollen filter is located in the Fiat Ducato X250. Even though what we are looking at is a camper, the mechanical part is the same as all the others. We need to open the glove compartment located in the center console. Inside, we will have to remove three Torx screws to take off the cover. After that, there will be another eight screws to remove, and the YouTuber precisely indicates the locations of these screws and where we need to take them out, in order to completely disassemble the drawer, which remains connected by a cable; we will just move it to the side. We find two more screws of size 5.5, which will allow us to remove the plastic cover from which we can take out the pollen filter. We clean the compartment well from dust and debris, replace it with a new and clean filter, making sure to install it in the correct direction, then we close the cover with its screws and put the bottom of the glove compartment back in place with its eight screws. We reattach the cover with the two Torx screws, and we are done.
Posted on 16 December 2025 by ScegliAuto
Related tutorials
Fiat Ducato
(2014-2026 /
X290)
Replacing the air filter, also known as the pollen filter, on a Fiat Ducato vehicle is not as easy and straightforward as it is for some car models. …
Fiat Ducato
(2014-2026 /
X290)
This guide shows how to replace the cabin air filter on the Fiat Ducato 2.3 MultiJet. The first step is to open the glove compartment and unscrew all…
Fiat Ducato
(1993-2016 /
MK 2)
In this video tutorial, you can see how to replace the pollen filter in a Fiat Ducato 230 by following a few simple steps: the pollen filter is locat…
Other guides you may be interested in
|
How to Remove the Toll Tag Holder from the Car Windscreen
The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.013
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
