Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Diesel Filter on a Fiat Tipo

Model: Fiat Tipo 356, 357, 358 - Years 2016-2026
Part: Diesel fuel filter

Lift the bonnet and insert the support rod. Locate the diesel filter, which is near the windscreen (if unsure, refer to the video where it is clearly indicated). Disconnect the two clips securing the fuel circuit and place a cloth under the filter. You will notice three connectors attached to it: first, disconnect the yellow one by pressing the tabs with a screwdriver, then the green one by unscrewing it slightly, and finally the grey one located above the filter. Unscrew the six T20 Torx screws securing it and remove the filter, insert the new filter, and reverse the process.

Updated on 8 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Diesel Filter on a Fiat Tipo
How to Replace the Diesel Filter on a Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) Before starting, open the front bonnet of your Fiat Tipo. Begin by unfastening the clips that secure the hoses connected to the diesel filter. Once d…
Replacing the Air Filter on the Fiat Tipo
Replacing the Air Filter on the Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) Follow these simple and quick steps to remove and replace the engine air filter on the Fiat Tipo. First, open the bonnet and start by loosening the c…
How to Replace the Air Filter on the Fiat Tipo?
How to Replace the Air Filter on the Fiat Tipo?
Fiat Tipo (2016-2026 / 356, 357, 358) As shown in this tutorial, replacing the air filter on the Fiat Tipo is an extremely simple and quick operation. Before proceeding, ensure that the e…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos