Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install the Roof Rack on a Fiat Punto 199

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Roof rack bars

See other generations:
Video tutorial

In this guide, you will learn how to install the roof rack on a Fiat Punto 199. The procedure is not complex but requires a bit of skill. Before starting, check the markings on the side metal brackets to position the bars in the correct direction.

Take the rear bar and position it on the roof, insert the brackets behind the rear window seals and tighten the nuts on both sides with a 10mm spanner. Before positioning the front bar, open the doors, position the brackets aligning the hole with the fixing bush on the bodywork and proceed to tighten the bolt on both sides.

Finish by inserting the four plastic covers (one on each bracket) and secure them with the spanner provided in the kit.


Updated on 8 April 2026 by ScegliAuto


Related tutorials

How to Install Roof Bars on a Fiat Punto 5-Door
How to Install Roof Bars on a Fiat Punto 5-Door
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Hello, today we will see how to install roof bars on our Fiat Punto. After selecting the roof bars that best suit our car, we can proceed with the in…
Fitting Rear Headlamp Bulb: Installing Second Reversing Light
Fitting Rear Headlamp Bulb: Installing Second Reversing Light
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To install a second reversing light in the left rear lamp, first obtain a bayonet lamp holder, the corresponding bulb, and some electrical cable to c…
How to Install the AUX Cable Preparation on a Fiat Grande Punto
How to Install the AUX Cable Preparation on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Today, we will look at the instructions to install the AUX cable preparation on the Fiat Grande Punto's radio, as well as on the Punto Evo. First, ge…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos