Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Wing Mirror Cover on Fiat Qubo

Model: Fiat Qubo MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Side mirror

Video tutorial

Using a plastic trim tool, remove the plastic on the A-pillar, working in the gap. Once removed, disconnect the two connectors (one is for adjusting the mirror and the other is for heating it) by operating on the appropriate tabs. Unscrew the three screws now exposed and disconnect the connector inside the pillar by lifting the small side latch that holds it. Done! At this point, you can remove the mirror along with the cover.

For reassembly, proceed in reverse: place the cover in position and screw in the various screws, reconnecting all the connectors.


Updated on 9 April 2026 by ScegliAuto


Related tutorials

How to Replace the Glass of the External Rear-View Mirror on a Fiat Qubo
How to Replace the Glass of the External Rear-View Mirror on a Fiat Qubo
Fiat Qubo (2008-2019 / MK 1) Today's instructions will show you the procedure for removing and replacing the glass of the external rear-view mirror on a Fiat Qubo. First, move to…
Removing Seats from a Fiat Qubo
Removing Seats from a Fiat Qubo
Fiat Qubo (2008-2019 / MK 1) In this short guide video, you will learn how to remove the rear seats from a Fiat Qubo; primarily, we will cover the essential steps. First, open th…
Reset Tyre Light on the Fiat Qubo
Reset Tyre Light on the Fiat Qubo
Fiat Qubo (2008-2019 / MK 1) How do you reset the light on the Fiat Qubo? Turn on the ignition and reset the light. Inflate the tyres before performing the reset. Enter the cabin…

How to Set the Clock on a Renault Master 3

This guide shows you how to set a new time on a Renault Master 3. Start by turning on the instrument cluster of the vehicle without starting the engine. Next, using the end of the right-hand steering column stalk, scroll through the options on the display until you reach 'set time', then press the down arrow button to make the displayed time blink. Once this is done, press and hold the down arrow button to change the hour, which you can adjust using the two arrow buttons at the end of the stalk. Once the correct hour is set, press and hold the down arrow button again to move to the minutes. After setting the correct time, restart the vehicle.

Watch the video!


by ScegliAuto

More videos