Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Sun Visor on Fiat Bravo

Model: Fiat Bravo Bravo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014

See other generations:
Video tutorial

Detach the sun visor on the semi-free side, as if you want to shield yourself from the light coming through the side window. Now unscrew the fixing screw located on the fixed side using a 4 mm Allen key. Pull the plate out slightly, as you will notice that a cable also runs through it, powering the bulb in the visor.

Gently pull the cable until you reach the connector, which you can disconnect. At this point, perform the desired replacement: you can either replace the visor by mounting the new one in reverse, or replace the bulb and reattach the same visor.


Updated on 11 April 2026 by ScegliAuto


Related tutorials

How to Repair the Sun Visor on the Fiat Bravo?
How to Repair the Sun Visor on the Fiat Bravo?
Fiat Bravo (2007-2014 / Bravo 2) To repair the sun visor on the Fiat Bravo, you need to completely remove it by detaching the pin on the inner part of the visor. Once the pin is rele…
How to Remove the Headlining of the Fiat Bravo
How to Remove the Headlining of the Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) This guide will show you the steps to remove the headlining or interior roof lining of the Fiat Bravo. First, get inside the vehicle and start by rem…
How to Remove the Radio from a Fiat Bravo
How to Remove the Radio from a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) How to replace the damaged stereo in a Fiat Bravo? Here’s how to remove it. Use the original metal keys to remove the stereo from the Fiat Bravo. Ins…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos