Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Battery from a Fiat 500

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Battery

See other generations:
Video tutorial

Do you want to replace the battery of your Fiat 500? Let's look at how to remove the battery and the covering parts. Pull up the engine compartment release lever located at the bottom left of the dashboard and lift the front bonnet, disengaging the locking lever with your fingers.

Remove the battery container and unscrew the screws of the electrical terminals. After unscrewing the screws and terminals, take the battery out of the engine compartment.

Replace the battery with a new one of the same size and voltage. Fit the new battery into the designated space and screw in the electrical terminal screws.


Updated on 11 April 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery of a Fiat 500 X
How to Replace the Key Battery of a Fiat 500 X
Fiat 500 (2014-2022 / 500 X) Press the designated unlock button to extract the physical emergency key from the electronic key of your Fiat 500 X. Using the extracted physical key…
How to Replace the Key Fob Battery on Fiat 500 E
How to Replace the Key Fob Battery on Fiat 500 E
Fiat 500 (2020-2026 / 500 E, 332) The following instructions will show you how to remove and replace the battery in the key fob for the Fiat 500 E. First, take your key fob and start …
Guide to replacing the battery of the Fiat 500
Guide to replacing the battery of the Fiat 500
Fiat 500 (2007-2024 / 312) In this guide, you will find instructions on how to remove and replace the battery of the Fiat 500. First, open the bonnet of the vehicle and start b…

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos