Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Injectors on a Fiat Doblò 2 1.3 MultiJet

Model: Fiat Doblo 263, Doblo 2, MK 2 - Years 2009-2021
Part: Fuel injectors

In this video, you will see the instructions that will allow you to remove and replace the diesel injectors on a second series Fiat Doblò, with a 1.3 MultiJet engine. First, open the bonnet of your car and remove the plastic protective cover; then disconnect the two intake hoses by unscrewing the clamp screws, as shown in the video. Now disconnect the high-pressure diesel pipes and unscrew the rail bolts; disconnect the electrical connectors from the injectors. Use a socket wrench with an extension to unscrew the injector bolts, and then remove them.

Updated on 14 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Injectors from a Fiat Doblò?
How to Remove the Injectors from a Fiat Doblò?
Fiat Doblo (2009-2021 / 263, Doblo 2, MK 2) To remove the injectors from a Fiat Doblò, open the bonnet to access the components inside the engine bay. You will need to detach the plastic cover …
Guide to replacing the timing belt of the Fiat Doblò 1.6 MultiJet
Guide to replacing the timing belt of the Fiat Doblò 1.6 MultiJet
Fiat Doblo (2009-2021 / 263, Doblo 2, MK 2) Below we will see the main instructions on how to disassemble and replace the timing belt of the Fiat Doblò 1.6 MultiJet. First, we open the hood of …
When and How to Change the Timing Belt on a Fiat Doblò 1.6 MultiJet
When and How to Change the Timing Belt on a Fiat Doblò 1.6 MultiJet
Fiat Doblo (2009-2021 / 263, Doblo 2, MK 2) In this tutorial video, you will see how to remove and replace the timing belt on a Fiat Doblò 1.6 MultiJet, following the instructions below. First,…

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos