Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Fiat
  4. :
  5. Bravo
  6. : Reset service warning light Fiat Bravo

Fiat Bravo - Video tutorial

Model: Fiat Bravo Bravo 2 - Years 2007-2014
Part: Checks and maintenance
Operation: Reset service warning light Fiat Bravo

In this short video we will see the instructions on how to reset the oil change routine maintenance service light on a second series Fiat Bravo. First we get inside the car and turn on the ignition by turning the key; then we press and hold the accelerator pedal and simultaneously press the brake pedal seven times. At this point we keep the accelerator pedal pressed for a few seconds and then turn off the ignition and release everything. So let's turn it back on and we'll see that the maintenance light has reset!


Posted on 10 February 2024 by ScegliAuto

    Frequently Asked Questions

    • Bravo 2007-2014 - How do you reset the service light on a Fiat Bravo 2009? Read Answer
    • Bravo 2007-2014 - When does the message "Invalid Hill Holder" appear on the FIAT Bravo 198? Read Answer
    • Bravo 2007-2014 - What indicators are there on the dashboard of the Fiat Bravo 2? Read Answer
    • Bravo 2007-2014 - What does the yellow triangle warning light with the exclamation point on the Fiat Bravo mean? Read Answer
    • Bravo 2007-2014 - What does "esp ed Hill Holder not available" mean in the Fiat Bravo? Read Answer
    • Bravo 1995-2002 - How to solve a problem with the Fiat Bravo 1.6 MultiJet glow plugs? Read Answer
    • Bravo 2007-2014 - What does "ESP not available" mean on the Fiat Bravo? Read Answer
    • Bravo 2007-2014 - How much does it cost to replace the silent block of the Fiat Bravo? Read Answer
    • Bravo 2007-2014 - What problems does the air flow in the passenger compartment present on the Fiat Bravo? Read Answer
    • Bravo 2007-2014 - When does the yellow word "have the engine checked" come on on the Fiat Bravo? Read Answer
    • Bravo 2007-2014 - How do you reset the expired service warning light in the FIAT Bravo? Read Answer
    • Bravo 2007-2014 - What are the lights of the Fiat Bravo? Read Answer
    • Bravo 2007-2014 - What does the engine warning light on the Fiat Bravo 1.6 multijet indicate? Read Answer
    • Bravo 2007-2014 - How do you disassemble the car radio of the Fiat Bravo? Read Answer
    • Bravo 2007-2014 - Why is the Hill Holder not available on the Fiat Bravo? Read Answer
    • Bravo 2007-2014 - Why did the engine failure warning light come on in the Fiat Bravo 1.6 Multijet? Read Answer
    • Bravo 2007-2014 - What to do if the "have the engine checked" light comes on in the Fiat Bravo? Read Answer
    • Bravo 2007-2014 - What does the car light with the padlock on the Fiat Bravo indicate? Read Answer
    • Bravo 2007-2014 - Yellow engine failure warning light on in the Fiat Bravo, why? Read Answer
    • Bravo 2007-2014 - The left side dual zone air conditioning does not work on the Fiat Bravo, what could it depend on? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos