Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the "Service" warning light on a Fiat Ducato

Model: Fiat Ducato X290 - Years 2014-2024
Part: Service warning light

Before we can begin, we will have to sit in the driver's seat of our Fiat Ducato. Let's start by turning the key in the ignition, thus activating the instrument panel. After that, we will have to go and press and hold the accelerator pedal, and in the meantime we will have to press the accelerator pedal seven times. Once this is done, we will have to continue holding the accelerator pedal for one minute. At this point, we will have to release the accelerator pedal, and subsequently we will have to go and turn off the instrument panel. When we have completed this step, we will have to wait another minute, and then reactivate the instrument panel, and we will have completed the reset.

Posted on 6 July 2021 by ScegliAuto

Video tutorial

Related tutorials

Fiat Ducato (2006-2014 / X250) The operation of resetting the Service light on the Fiat Ducato is done by inserting the ignition key into the appropriate slot, so that it can be tu…
Fiat Ducato (2006-2014 / X250) On the Ducato, the Service light reset operation is performed by inserting the ignition key into the appropriate slot and turning it to start the ins…
Fiat Ducato (2014-2024 / X290) To reset the Service light of the Fiat Ducato, you need to connect a diagnostic tool to the OBD port of the vehicle: this port will be located on the…

Other guides you may be interested in

    Frequently Asked Questions

    • Ducato 2014-2024 - How to reset the service warning light on Fiat Ducato? Read answer

How to Remove the Gear Knob on an Opel Astra

How to replace the gear knob on an Opel Astra? Follow these steps: use a plastic lever to disconnect the leather gaiter frame (if you need to replace it). Grip the knob with both hands and pull it upwards (with a strong and decisive motion) until it comes off the gear stick. For installation: fit the new gaiter and position it on the centre tunnel, take the new knob and push it onto the stick, tightening it until fully threaded. Test the movement of the stick on the centre tunnel to ensure the knob is correctly fitted.

Watch the video!


by ScegliAuto

More videos