Do it yourself
Frequently asked questions about cars and motorcycles

Cleaning the Oil Vapour Recovery Filter

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Oil filter

To clean the filter in the oil vapour recovery duct, remove the air filter housing and the 90° elbow located on the duct in question (the duct is on the right side of the rocker cover, just behind the spark plug boot). Once the elbow is removed, you can access the filter, which should be carefully extracted using pliers by gripping the central stem; the filter is a sort of spiral-shaped mesh. Clean the filter and reassemble it in reverse order.

Updated on 8 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Punto (1993-1999 / MK 1, 176) The video shows the removal of the entire filter box secured to the throttle body with two nuts: once the nuts are unscrewed and the vapour recovery …
Fiat Punto (1999-2011 / MK 2, 188) Time, heat, and oil and petrol vapours wear out engine components, particularly rubber parts. Therefore, in case of a leak or oil vapour escape, it i…
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To replace the air filter, first open the bonnet and remove the air filter box. To do this, unscrew the two bolts on either side of the filter box th…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos