Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Pollen Filter on a Fiat Stilo

Model: Fiat Stilo MK 1 - Years 2001-2010
Part: Cabin air filter

Before starting, enter the cabin of your Fiat Stilo. Begin by unclipping and removing the cover located in the lower left section of the centre console, near the passenger side, by releasing the two securing clips. Next, remove the underlying cover by unscrewing the three securing screws, then unclip and remove the cover itself. After this, remove the air filter cover by unscrewing the screws and releasing the securing clips. This will give you access to the cabin air filter, which you need to extract from its housing, completing the disassembly. To install the new filter, follow this procedure in reverse, and the replacement will be finished.

Updated on 19 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Gear Lever Knob on a Fiat Stilo
Removing the Gear Lever Knob on a Fiat Stilo
Fiat Stilo (2001-2010 / MK 1) In this guide, you will learn how to remove and replace the gear lever knob on a Fiat Stilo in simple steps. First, get inside the vehicle and rotate…
Replacing the Front Headlamp Bulb on a Fiat Stilo
Replacing the Front Headlamp Bulb on a Fiat Stilo
Fiat Stilo (2001-2010 / MK 1) In today's tutorial, you will see how to remove and replace the front headlamp bulb on a Fiat Stilo. First, open the bonnet and remove the upper Torx…
How to Replace the Cabin Air Filter on a Fiat Stilo
How to Replace the Cabin Air Filter on a Fiat Stilo
Fiat Stilo (2001-2010 / MK 1) Before you start, open the front passenger door of your Fiat Stilo. Begin by removing the lower right side cover of the centre tunnel, releasing the …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos