Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Air Filter on a Fiat Stilo

Model: Fiat Stilo MK 1 - Years 2001-2010
Part: Cabin air filter

When servicing the car, do not forget the cabin air filter. Here’s how to change it on a Fiat Panda. The cabin filter is located at the bottom left of the glove compartment. Use a plastic lever to detach the cover located at the lower left of the dashboard. Unscrew the cap from the filter housing, then remove the worn cabin air filter. Insert a new cabin air filter, ensuring it fits snugly against the walls of the housing, reattach the filter housing cap and tighten the screws. Check the correct installation of the previously fitted part.

Updated on 15 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter on a Fiat Stilo
How to Replace the Cabin Air Filter on a Fiat Stilo
Fiat Stilo (2001-2010 / MK 1) Before you start, open the front passenger door of your Fiat Stilo. Begin by removing the lower right side cover of the centre tunnel, releasing the …
Replacing Cabin Filter on Fiat Stilo
Replacing Cabin Filter on Fiat Stilo
Fiat Stilo (2001-2010 / MK 1) In this video, you will see how to remove the cabin filter from a Fiat Stilo. First, get inside the cabin and remove the plastic panel located at the…
How to Change the Air Filter on a Fiat Stilo
How to Change the Air Filter on a Fiat Stilo
Fiat Stilo (2001-2010 / MK 1) Let’s see how to remove and replace the engine air filter on a Fiat Stilo. Open the car door, pull up the engine compartment release lever located at…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos