Do it yourself
Frequently asked questions about cars and motorcycles

How to change the engine air filter in a Fiat Stilo

Model: Fiat Stilo MK 1 - Years 2001-2010
Part: Air filter

To replace the engine air filter on a Fiat Stilo, open the bonnet and locate the filter box, connected to the engine's intake system. After unscrewing the securing screws or releasing the clips on the cover, lift it to access the filter element. Remove the worn filter and thoroughly clean the inside of the housing, removing dust and other debris. Then insert the new filter, ensuring it is correctly aligned and fully seated in its place. Finally, close the filter box cover, tighten the screws or reposition the locking clips, and check that the intake system is properly sealed.

Posted on 3 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Stilo (2001-2010 / MK 1) Let’s see how to remove and replace the engine air filter on a Fiat Stilo. Open the car door, pull up the engine compartment release lever located at…
Fiat Stilo (2001-2010 / MK 1) Replacing the engine air filter on this model is quite unusual, as the box containing the filter (air box) is not connected inside the engine bay as …
Fiat Stilo (2001-2010 / MK 1) Before you start, open the front passenger door of your Fiat Stilo. Begin by removing the lower right side cover of the centre tunnel, releasing the …

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos