Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Stilo
    4. : How to change the engine oil and filter on a Fiat Stilo

Fiat Stilo - Video tutorial

Model: Fiat Stilo MK 1 - Years 2001-2010
Part: Oil filter
Operation: How to change the engine oil and filter on a Fiat Stilo

How do you change the engine oil and filter on a Fiat Stilo? Let's see in this video guide how to proceed with the replacement. We lift the car on a jack and unscrew the oil pan pin; let the liquid flow into a container for disposal. We open the car door and pull up the engine compartment opening lever located at the bottom left of the dashboard and lift up the front hood, we secure the same. With a strap wrench we unscrew the large oil filter. We remove the oil filter inside the engine compartment and place a new one. Finally we top up the new liquid and close the front hood.


Posted on 18 November 2023 by ScegliAuto



Fiat Stilo oil filter replacement
Fiat Stilo (2001-2010 / MK 1) Let's see where the Fiat Stilo oil filter is positioned and how it can be removed. We lift the front hood and find the oil filter at the bottom. With
Replace the diesel filter on Fiat Stilo
Fiat Stilo (2001-2010 / MK 1) Do we want to replace the diesel filter on a Fiat Stilo? Let's see how to take it apart. First we lift the front engine hood and locate the diesel fi
How to change the air filter on Fiat Stilo
Fiat Stilo (2001-2010 / MK 1) Let's see how to remove and replace the engine air filter on a Fiat Stilo. We open the car door, pull up the engine compartment opening lever located

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos