Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil Filter Replacement on a Fiat Stilo

Model: Fiat Stilo MK 1 - Years 2001-2010
Part: Oil filter

Locate the oil filter on the Fiat Stilo and how to remove it. Lift the front bonnet and find the oil filter at the bottom. Use a strap wrench to unscrew the oil filter: remove the worn oil filter and position a new one after cleaning the surface (fit the filter after draining the oil). Raise the car on a jack and unscrew the bolt from the oil sump: let the fluid drain into a container. Refill the new oil into the engine until the level indicated on the dipstick is reached. Close the engine compartment after maintenance.

Updated on 5 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change Engine Oil and Filter on a Fiat Stilo
How to Change Engine Oil and Filter on a Fiat Stilo
Fiat Stilo (2001-2010 / MK 1) How to change engine oil and filter on a Fiat Stilo? Follow this guide to proceed with the replacement. Lift the car on a jack and unscrew the bolt f…
Replace the Diesel Filter on a Fiat Stilo
Replace the Diesel Filter on a Fiat Stilo
Fiat Stilo (2001-2010 / MK 1) Do you want to replace the diesel filter on a Fiat Stilo? Here’s how to remove it. First, lift the front bonnet and locate the diesel filter. Disconn…
Replacing Cabin Filter on Fiat Stilo
Replacing Cabin Filter on Fiat Stilo
Fiat Stilo (2001-2010 / MK 1) In this video, you will see how to remove the cabin filter from a Fiat Stilo. First, get inside the cabin and remove the plastic panel located at the…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos