Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear bumper of a Fiat Panda

Model: Fiat Panda MK 1, 141 - Years 1980-2003
Part: Rear bumper

Before we can start, we will have to get out of the cockpit of our Fiat Panda, and then head towards the rear of the car. So let's start by unscrewing and removing the bolts that secure the lower side of the bumper. After that, we will have to remove the license plate holder, and then unscrew the screws underneath. By doing so, we will have freed the bumper itself. We then proceed by going to disengage it from its housing. When we have completed this step, we will be able to definitively remove the rear bumper of our Fiat Panda, and we will have completed the disassembly.

Posted on 8 August 2021 by ScegliAuto

This video is currently unavailable

Related tutorials

How to remove the rear bumper of the Fiat Panda
How to remove the rear bumper of the Fiat Panda
Fiat Panda (2012-2024 / MK 3, 319) Removing the rear bumper of your Fiat Panda may seem like a very complex operation, but in reality all you need to do is follow the following procedu…
How do you remove the rear bumper of the Fiat Panda?
How do you remove the rear bumper of the Fiat Panda?
Fiat Panda (2012-2021 / ) In order to remove the rear bumper of the Fiat Panda you have to loosen all the screws and remove the rivets that secure the bumper to its housing. A…
How to Fit the Rear Bumper on a Fiat Panda
How to Fit the Rear Bumper on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) How do you fit a rear bumper on a Fiat Panda? Follow these steps; it's not too complex if done methodically. First, grab the bumper and position it p…

How to Remove the Heating Radiator on a Fiat Panda

Watch this video to learn how to remove the heating radiator from a Fiat Panda. First, remove the plastic cover from the centre tunnel (located under the centre tunnel) and the cover around the gearbox. Unscrew the securing screws with a screwdriver as shown in the video and remove the black plastic cover that conceals the heating radiator. Once all the steps are completed, move to the engine bay: remove the plastic engine cover and disconnect the two hoses (unscrew the securing clips) of the radiator that extends into the cabin. Install the new part. Reverse all the assembly steps.

Watch the video!


by ScegliAuto

More videos