Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Door Pull of a Fiat Punto?

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Car door

To dismantle the door pull of a Fiat Punto, you first need to remove the door panel. Then, using a 6 mm Allen key, remove the bolts located on the pull itself. Next, unscrew the Torx screws that secure the pull to the body: this will allow you to remove the old pull. The new replacement part should be inserted through the holes in the panel and secured in its housing. It should then be reattached with the two Allen bolts and the previously removed Torx screws. Finally, reassemble the door panel.

Updated on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Repair or Replace the Door Handle and Lock of the Fiat Grande Punto
How to Repair or Replace the Door Handle and Lock of the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) This guide provides instructions on how to remove and replace the external door handle and lock of the Fiat Grande Punto. First, open the front door …
How to Replace the External Door Handle on a Fiat Grande Punto?
How to Replace the External Door Handle on a Fiat Grande Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To replace the external door handle on a Fiat Grande Punto, remove the inner door panel by loosening its fixing screws and disconnecting the connecto…
How to Remove the Window Switch Button on a Fiat Punto
How to Remove the Window Switch Button on a Fiat Punto
Fiat Punto (1993-1999 / MK 1, 176) How to remove the window switch button located in the passenger door panel of a Fiat Punto? This video explains how to proceed. Before starting disas…

Other guides you may be interested in

    Frequently Asked Questions

    • Punto 1999-2011 - Where is the Fiat Punto door switch located? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos