Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : Removing the bumper of the Fiat 500

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2021
Part: Front bumper
Operation: Removing the bumper of the Fiat 500

We want to remove the front bumper of the Fiat 500 but we don't know how to do it? To begin we lift the front cover hood, unscrew the tightening screws placed in the upper part of the bumper. Removed the screws let's unscrew the screws inside the right and left stone guard (we lift the car on a column bridge if there are screws underneath). Once all the screws have been removed, we just have to remove the bumper in all its parts. We mount the new bumper above the car sheet, connect any electrical clamps before laying. We replace the headlights if they are damaged.


Posted on 23 February 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos