Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Remote Key Battery on the Fiat Tipo 356

Model: Fiat Tipo 356, 357, 358 - Years 2016-2026
Part: Key

In this short video, you will see how to disassemble and replace the battery in the remote key for the Fiat Tipo 356 by following these simple steps. First, take your remote and start by removing the rear cover, prying it off with something thin; then remove the small round cover by turning it with a flat screwdriver. At this point, remove and replace the battery found inside, of the correct type (in this case, a CR 2032 at 3V); simply insert it the right way round and assemble the remote!

Updated on 23 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Remote Control Battery on a Fiat Tipo?
How to Replace the Remote Control Battery on a Fiat Tipo?
Fiat Tipo (2016-2026 / 356, 357, 358) In this tutorial, we will see how to replace the battery in the remote control of a Fiat Tipo. For this simple and quick operation, you will only nee…
How to Replace the Remote Battery of the Fiat Tipo?
How to Replace the Remote Battery of the Fiat Tipo?
Fiat Tipo (2016-2026 / 356, 357, 358) To replace the remote battery of the Fiat Tipo, press the button on the top of the device to access the bottom of the key housing. Here, you will fin…
Programming the Remote Key for the Fiat Tipo
Programming the Remote Key for the Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) In this video tutorial, you will learn how to program the remote key for the Fiat Tipo, as well as for all other models from the manufacturer. First,…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos